View NCS2564_4402003.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? semiconductor components industries, llc, 2009 march, 2009 ? rev. 1 1 publication order number: NCS2564/d NCS2564 four-channel video driver with selectable sd / hd reconstruction filters the NCS2564 is a 4 ? channel high speed video driver with 6th order butterworth reconstruction filters on each channel. a first set of 3 ? channel has selectable standard definition (sd) / high definition (hd) filters, one per channel. a fourth channel offers an extra filter driver for driving cvbs ? type video signal. the NCS2564 is in fact a combination of a triple sd/hd video driver plus a single cvbs video driver. it is designed to be compatible with digital ? to ? analog converters (dac) embedded in most video processors. to further reduce power consumption, 2 enable pins are provided one for the triple driver and another one for the single driver. one pin allows selecting the filter frequency of the triple driver. all channels can accept dc ? or ac ? coupled signals. in case of ac ? coupled inputs, the internal clamps are enabled. the outputs can drive both ac and dc coupled 150 loads. features ? 3 ? channel with per channel a selectable sixth ? order butterworth 8/34 mhz filter ? one cvbs driver including 6th order butterworth 8 mhz filter ? transparent clamp ? internal fixed gain: 6 db 0.2 ? integrated level shifter ? ac ? or dc ? coupled inputs and outputs ? low quiescent current ? shutdown current 42 a typical (disabled) ? each channel capable to drive 2 by 150 loads ? wide operating supply voltage range: +4.7 v to +5.3 v ? esd human body model (hbm) > 5 kv on video outputs ? tssop ? 14 package ? these are pb ? free devices typical application ? set top box decoder ? dvd player / recorder ? hdtv device package shipping ? ordering information tssop ? 14 tbd suffix case 948g marking diagram http://onsemi.com 1 14 ncs 2564 alyw 1 14 NCS2564 = specific device code a = assembly location l = wafer lot y = year w = work week = pb ? free package NCS2564dtbr2g tssop ? 14 (pb ? free) 2500 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specifications brochure, brd8011/d. 1 2 3 4 5 6 7 14 13 12 11 10 9 8 cvbs_in vcc sd/hd_in1 sd/hd_in2 sd/hd_in3 cvbs_out gnd gnd sd/hd_out2 sd/hd_out3 sd/hd_en pinout cvbs_en sd /hd sd/hd_out1 (top view)
NCS2564 http://onsemi.com 2 selectable 8/34 mhz filter figure 1. NCS2564 block diagram 6db 6db 6db 6db transparent clamp transparent clamp transparent clamp transparent clamp 6th order, selectable 8/34 mhz filter 6th order, 6th order, 6th order, 8 mhz filter cvbs_in cvbs_en 1 2 3 4 5 6 7 14 13 12 11 10 9 8 250 k gnd vcc sd /hd 250 k sd/hd_in1 sd/hd_in2 sd/hd_in3 cvbs_out gnd gnd sd/hd_en sd/hd_out1 sd/hd_out2 sd/hd_out3 selectable 8/34 mhz filter
NCS2564 http://onsemi.com 3 pin description pin no. name type description 1 cvbs_in input video input for video signal featuring a frequency bandwidth compatible with ntsc / pal / secam video (8 mhz) ? cvbs channel 2 cvbs_en input cvbs channel enable /disable function: low = enable, high = disable. when left open the default state is enable. 3 vcc power power supply / 4.7 v to 5.3 v 4 sd /hd input pin of selection enabling the standard definition or high definition filters (8 mhz / 34 mhz) for channels sd/hd ? when low sd filters are selected, when high hd filters are selected. 5 sd/hd_in1 input selectable sd or hd video input 1 ? sd/hd channel 1 6 sd/hd_in2 input selectable sd or hd video input 2 ? sd/hd channel 2 7 sd/hd_in3 input selectable sd or hd video input 3 ? sd/hd channel 3 8 sd/hd_out3 output sd/hd video output 3 ? sd/hd channel 3 9 sd/hd_out2 output sd/hd video output 2 ? sd/hd channel 2 10 sd/hd_out1 output sd/hd video output 1 ? sd/hd channel 1 11 sd/hd_en input sd/hd channel enable/disable function: low = enable, high = disable. when left open the default state is enable. 12 gnd ground ground 13 gnd ground ground 14 cvbs_out output cvbs video output ? cvbs channel attributes characteristic value esd human body model all pins (note 1) machine model all pins (note 2) 4 kv 200 v moisture sensitivity (note 3) level 3 flammability rating oxygen index: 28 to 34 ul 94 v ? 0 @ 0.125 in. 1. human body model (hbm), r = 1500 , c = 100 pf 2. machine model (mm) 3. for additional information, see application note and8003/d
NCS2564 http://onsemi.com 4 maximum ratings rating symbol value unit power supply voltages v cc ? 0.3 v cc 5.5 vdc input voltage range v i ? 0.3 v i v cc vdc input differential voltage range v id ? 0.3 v i v cc vdc output current (indefinitely) per channel i o 40 ma maximum junction temperature (note 4) t j 150 c operating ambient temperature t a ? 40 to +85 c storage temperature range t stg ? 60 to +150 c thermal resistance, junction ? to ? air r ja 125 c/w stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. 4. power dissipation must be considered to ensure maximum junction temperature (t j ) is not exceeded. maximum power dissipation the maximum power that can be safely dissipated is limited by the associated rise in junction temperature. for the plastic packages, the maximum safe junction temperature is 150 c. if the maximum is exceeded momentarily, proper circuit operation will be restored as soon as the die temperature is reduced. leaving the device in the ?overheated? condition for an extended period can result in device burnout. to ensure proper operation, it is important to observe the derating curves. figure 2. power dissipation vs temperature 0 200 400 600 800 1000 1200 1400 0 102030405060708090100 temperature ( c) power dissipation (mv) 1800 1600 ? 40 ? 30 ? 20 ? 10
NCS2564 http://onsemi.com 5 dc electrical characteristics (v cc = +5.0 v, r source = 37.5 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified) symbol characteristics conditions min typ max unit power supply v cc supply voltage range 4.7 5.0 5.3 v i cc supply current sd channels selected + c vbs hd channels selected + c vbs 40 50 55 70 ma i sd shutdown current (cvbs_en and sd/hd_en high) 42 60 a dc performance vi input common mode voltage range gnd 1.4 v pp v il input low level for the control pins (2, 4, 11) 0 0.8 v v ih input high level for the control pins (2, 4, 11) 2.4 v cc v r pd pulldown resistors on pins cvbs_en and sd/hd_en 250 k output characteristics v oh output voltage high level 2.8 v v ol output voltage low level 200 mv i o output current 40 ma ac electrical characteristics for standard definition channels (pin numbers (1, 14) (5, 10), (6, 9), (7, 8)) (v cc = +5.0 v, v in = 1 v pp , r source = 37.5 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified, sd /hd = low) symbol characteristics conditions min typ max unit a vsd voltage gain v in = 1 v ? all sd channels 5.8 6.0 6.2 db bw sd low pass filter bandwidth (note 6) ? 1 db ? 3 db 5.5 6.5 7.2 8.0 mhz a rsd stop ? band attenuation (notes 6 and 7) @ 27 mhz 43 50 db dg sd differential gain error 0.7 % d sd differential phase error 0.7 thd total harmonic distortion v out = 1.4 v pp @ 3.58 mhz 0.35 % x sd channel ? to ? channel crosstalk @ 1 mhz and vi n = 1.4 v pp ? 57 db snr sd signal ? to ? noise ratio ntc ? 7 test signal, 100 khz to 4.2 mhz (note 5) 72 db t sd propagation delay @ 4.5 mhz 70 ns gd sd group delay variation 100 khz to 8 mhz 20 ns 5. snr = 20 x log (714 mv / rms noise) 6. 100% of tested ics fit the bandwidth and attenuation tolerance at 25 c. 7. guaranteed by characterization.
NCS2564 http://onsemi.com 6 ac electrical characteristics for high definition channels (pin numbers (5, 10) (6, 9), (7, 8)) (v cc = +5.0 v, v in = 1 v pp , r source = 37.5 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified, sd /hd = high) symbol characteristics conditions min typ max unit a vhd voltage gain v in = 1 v ? all hd channels 5.8 6.0 6.2 db bw hd low pass filter bandwidth ? 1 db (note 9) ? 3 db (note 10) 26 30 31 34 mhz a rhd stop ? band attenuation @ 44.25 mhz (note 10) @ 74.25 mhz (note 9) 33 15 42 db thd hd total harmonic distortion v out = 1.4 v pp @ 10 mhz v out = 1.4 v pp @ 15 mhz v out = 1.4 v pp @ 20 mhz 0.4 0.6 0.8 % x hd channel ? to ? channel crosstalk @ 1 mhz and v in = 1.4 v pp ? 60 db snr hd signal ? to ? noise ratio white signal, 100 khz to 30 mhz, (note 8) 72 db t hd propagation delay 25 ns gd hd group delay variation from 100 khz to 30 mhz 10 ns 8. snr = 20 x log (714 mv / rms noise) 9. guaranteed by characterization. 10. 100% of tested ics fit the bandwidth and attenuation tolerance at 25 c.
NCS2564 http://onsemi.com 7 typical characteristics v cc = +5.0 v, v in = 1 v pp , r source = 37.5 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 30 100k 1m 10m 100m ? 1 db @ 6.7 mhz ? 3 db @ 8.1 mhz ? 53 db @ 27 mhz frequency (hz) normalized gain (db) figure 3. sd normalized frequency response 100k 1m 10m 100m 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 30 normalized gain (db) frequency (hz) figure 4. hd normalized frequency response ? 1 db @ 31 mhz ? 3 db @ 33 mhz ? 16 db @ 44.25 mhz ? 37 db @ 74.25 mhz normalized gain (db) frequency (hz) figure 5. sd passband flatness 100k 1m 10m 0.226 db @ 3.6 mhz 0.4 0.35 0.3 0.25 0.2 0.15 0.1 0.5 0 ? 0.5 ? 0.1 frequency (hz) figure 6. hd passband flatness 100k 1m 10m 30m 1.4 normalized gain (db) 1.2 1.0 0.8 0.6 0.4 0.2 0 ? 0.2 ? 0.4 1.035 db @ 18.7 mhz frequency (hz) figure 7. sd channel ? to ? channel crosstalk 20k 1m 10m gain (db) ? 90 ? 85 ? 80 ? 75 ? 70 ? 65 ? 60 ? 55 ? 50 ? 45 ? 40 ? 79 db @ 50 khz ? 51.8 db @ 6.85 mhz gain (db) frequency (hz) figure 8. hd channel ? to ? channel crosstalk 20 100k 10m 1m 50m 100k ? 37.6 db @ 25 mhz ? 67 db @ 50 khz ? 70 ? 65 ? 60 ? 55 ? 50 ? 45 ? 40 ? 35 ? 30 ? 25 ? 20
NCS2564 http://onsemi.com 8 typical characteristics v cc = +5.0 v, v in = 1 v pp , r source = 37.5 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified frequency (hz) figure 9. sd normalized group delay 400k 1m 10m ? 70 ? 60 ? 50 ? 40 20.7 ns @ 7 mhz 20m 400k 1m 10m 100m frequency (hz) figure 10. hd normalized group delay 15 ? 30 30 20 10 0 ? 10 ? 20 10 5 0 ? 5 ? 10 ? 15 ? 20 ? 25 ? 30 ? 35 9.1 ns @ 24.1 mhz group delay (ns) group delay (ns) figure 11. sd propagation delay figure 12. hd propagation delay figure 13. sd small signal response figure 14. hd small signal response output input 70 ns 0.7 v pp 0.7 v pp 25 ns input output 200 mv output input 200 mv input output
NCS2564 http://onsemi.com 9 typical characteristics v cc = +5.0 v, v in = 1 v pp , r source = 37.5 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified figure 15. sd large signal response figure 16. hd large signal response output input 1 v pp 1 v pp output input figure 17. sd and hd v cc psrr vs. frequency 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 ? 80 ? 90 ? 100 20 100k 10m 1m 50m psrr (db) frequency (hz)
NCS2564 http://onsemi.com 10 typical characteristics v cc = +5.0 v, v in = 1 v pp , r source = 37.5 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified figure 18. sd frequency response and group delay figure 19. hd frequency response and group delay 20 400k 1m 10m 50m 400k 1m 10m 100m 20 normalized gain (db) normalized gain (db) (hz) (hz) 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 ? 80 60 50 40 30 20 10 0 ? 10 ? 20 ? 30 ? 40 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 ? 80 normalized group delay (ns) normalized group delay (ns) 35 30 25 20 15 10 5 0 ? 5 ? 10 ? 15 0 0.31 0.68 0.75 0.76 0.77 0 0.1 0.2 0.3 0..4 0.5 0.6 0.7 0.8 0.9 123456 harmonic differential gain (%) figure 20. sd differential gain 123456 harmonic figure 21. sd differential phase 0 0.1 0.2 0.3 0..4 0.5 0.6 0.7 0.8 0.9 0.07 0.36 0.75 0.65 differential phase ( ) 0.14
NCS2564 http://onsemi.com 11 applications information the NCS2564 quad video driver has been optimized for standard and high definition video applications covering the requirements of the standards composite video (cvbs), s ? video, component video (480i/525i, 576i/625i, 720p/1080i) and related (rgb). the three sd/hd channels have selectable filters (8 mhz and 34 mhz) for covering either standard definition ? like video applications or high definition video applications. these frequencies are selectable using the pin sd /hd. in the regular mode of operation each channel provides an internal voltage ? to ? voltage gain of 2 from input to output. this ef fectively reduces the number of external components required as compared to discrete approached implemented with stand alone op amps. an internal level shifter is employed shifting up the output voltage by adding an of fset of 200 mv. this prevents sync pulse clipping and allows dc ? coupled output to the 150 video load. in addition, the NCS2564 integrates a 6 th order butterworth filter for each. this allows rejection of the aliases or unwanted over-sampling effects produced by the video dac. similarly for the case of dvd recorders which use an adc, this anti ? aliasing filter (reconstruction filter) will avoid picture quality issue and will aide filtration of parasitic signals caused by emi interference. figure 22. ac ? coupled configuration at the input and output 0.1 f vcc sd /hd 3 2 1 8 9 14 cvbs_in gnd gnd cvbs_out 6 7 4 11 8 9 sd/hd_en 5 10 tv 220 f 75 75 220 f 220 f 75 75 75 75 rs video processor y / g pb / b pr / r cvbs y / g pb / b pr / r sd/hd en cvbs en sd/hd sel 75 cable 75 cable 75 cable 220 f 75 75 cvbs 75 cable 0.1 f 10 f + 5 v cvbs_en sd/hd in1 sd/hd in2 sd/hd in3 sd/hd out1 sd/hd out2 sd/hd out3 rs rs rs 0.1 f 0.1 f 0.1 f NCS2564 a built ? in diode ? like clamp is used into the chip for each channel to support the ac ? coupled mode of operation. the clamp is active when the input signal goes below 0 v. the built ? in clamp and level shifter allow the device to operate in different configuration modes depending on the dac output signal level and the input common mode voltage of the video driver. when the configuration is dc ? coupled at the inputs and outputs the 0.1 f and 220 f coupling capacitors are no longer used, and the clamps are in that case inactive; this configuration provides a low cost solution which can be implemented with few external components (figure 23). the input is ac ? coupled when either the input ? signal amplitude goes over the range 0 v to 1.4 v or the video source requires such a coupling. in some circumstances it may be necessary to auto ? bias signals with the addition of a pullup and pulldown resistors or only pullup resistor (typical 7.5 m combined with the internal 800 k pulldown) making the clamp inactive. the output ac ? coupling configuration is advantageous for eliminating dc ground loop with the drawback of making the device more sensitive to video line or field tilt issues in the case of a too low output coupling capacitor. in some cases it may be necessary to increase the nominal 220 f capacitor value. shutdown mode if the enable pins are left open by default the circuit will be enabled. the enable pin offers a shutdown function, so the NCS2564 can consequently be disabled when not used. the NCS2564?s quiescent current reduces to 42 a typical during shutdown mode. dc ? coupled output the outputs of the NCS2564 can be dc ? coupled to a 150 load (figure 23). this has the advantage of eliminating the ac ? coupling capacitors at the output by reducing the number of external components and saving space on the board. this can be a key advantage for some applications with limited space. the problems of field tilt effects on the video signal are also eliminated providing the best video quality with optimal dynamic or peak ? to ? peak amplitude of the video signal allowing operating thanks to the built ? in level shifter without risk of signal clipping. in this coupling configuration the average output voltage is higher than 0 v and the power consumption can be a little higher than with an ac ? coupled configuration.
NCS2564 http://onsemi.com 12 vcc sd /hd 3 2 1 8 9 14 cvbs_in gnd gnd cvbs_out 6 7 4 11 8 9 sd/hd_en 5 10 tv 75 75 75 75 75 75 rs video processor y / g pb / b pr / r cvbs y / g pb / b pr / r sd/hd en cvbs en sd/hd sel 75 cable 75 cable 75 cable 75 75 cvbs 75 cable 0.1 f 10 f + 5 v cvbs_en sd/hd in1 sd/hd in2 sd/hd in3 sd/hd out1 sd/hd out2 sd/hd out3 rs rs rs NCS2564 figure 23. dc ? coupled input and output configuration vcc sd /hd 3 2 1 8 9 14 cvbs_in gnd gnd cvbs_out 6 7 4 11 8 9 sd/hd_en 5 10 tv 75 75 75 75 75 75 rs video processor y / g pb / b pr / r cvbs y / g pb / b pr / r sd/hd en cvbs en sd/hd sel 75 cable 75 cable 75 cable 75 75 cvbs1 75 cable 0.1 f 10 f + 5 v cvbs_en sd/hd in1 sd/hd in2 sd/hd in3 sd/hd out1 sd/hd out2 sd/hd out3 rs rs rs NCS2564 figure 24. typical application 75 cable 75 220 f 220 f 220 f 220 f 220 f cvbs2 other display 75
NCS2564 http://onsemi.com 13 vcc sd /hd 3 2 1 8 9 14 cvbs_in gnd gnd cvbs_out 6 7 4 11 8 9 sd/hd_en 5 10 tv 75 75 75 75 75 75 rs video processor y / g pb / b pr / r cvbs y / g1 pb / b1 pr / r1 sd/hd en cvbs en sd/hd sel 75 cable 75 cable 75 cable 75 75 cvbs2 75 cable 0.1 f 10 f + 5 v cvbs_en sd/hd in1 sd/hd in2 sd/hd in3 sd/hd out1 sd/hd out2 sd/hd out3 rs rs rs NCS2564 figure 25. NCS2564 driving 2 scarts simultaneously 75 cable 75 220 f 220 f 220 f 220 f 220 f cvbs1 75 0.1 f 0.1 f 0.1 f 0.1 f tv 75 75 75 75 75 75 y / g2 pb / b2 pr / r2 75 cable 75 cable 75 cable 220 f 220 f 220 f
NCS2564 http://onsemi.com 14 video driving capability with an output current capability of 40 ma the NCS2564 was designed to be able to drive at least 2 video display loads in parallel. this type of application is illustrated figure 24. figure 26 (multiburst) and figure 27 (linearity) show that the video signal can efficiently drive a 75 equivalent load and not degrade the video performance. esd protection all the device pins are protected against electrostatic discharge at a level of 4 kv hbm. this feature has been considered with a particular attention with esd structure able to sustain typically 4 kv hbm. this parameter is particularly important for video driver which usually constitutes the last stage in the video chain before the video output connector. figure 26. multiburst test with two 150 loads figure 27. linearity test with two 150 loads
NCS2564 http://onsemi.com 15 package dimensions tssop ? 14 case 948g ? 01 issue b dim min max min max inches millimeters a 4.90 5.10 0.193 0.200 b 4.30 4.50 0.169 0.177 c ??? 1.20 ??? 0.047 d 0.05 0.15 0.002 0.006 f 0.50 0.75 0.020 0.030 g 0.65 bsc 0.026 bsc h 0.50 0.60 0.020 0.024 j 0.09 0.20 0.004 0.008 j1 0.09 0.16 0.004 0.006 k 0.19 0.30 0.007 0.012 k1 0.19 0.25 0.007 0.010 l 6.40 bsc 0.252 bsc m 0 8 0 8 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimension a does not include mold flash, protrusions or gate burrs. mold flash or gate burrs shall not exceed 0.15 (0.006) per side. 4. dimension b does not include interlead flash or protrusion. interlead flash or protrusion shall not exceed 0.25 (0.010) per side. 5. dimension k does not include dambar protrusion. allowable dambar protrusion shall be 0.08 (0.003) total in excess of the k dimension at maximum material condition. 6. terminal numbers are shown for reference only. 7. dimension a and b are to be determined at datum plane ? w ? . s u 0.15 (0.006) t 2x l/2 s u m 0.10 (0.004) v s t l ? u ? seating plane 0.10 (0.004) ? t ? ??? ??? ??? section n ? n detail e j j1 k k1 ? w ? 0.25 (0.010) 8 14 7 1 pin 1 ident. h g a d c b s u 0.15 (0.006) t ? v ? 14x ref k n n 7.06 14x 0.36 14x 1.26 0.65 dimensions: millimeters 1 pitch *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. sc illc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems in tended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hol d scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding th e design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resa le in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 NCS2564/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loca l sales representative

▲Up To Search▲

Price & Availability of NCS2564

	To Download NCS2564 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .